PETG-CF settings for the Bambu Lab A1 mini

Last updated 9 November 2026

Bambu Studio's Generic PETG-CF profile prints at 255 °C, with the bed at 70 °C and the part fan at 0 to 30 %.

Profile Nozzle Bed Part fan Max flow Retraction
Generic PETG-CF 255 °C 70 °C 0 to 30 % 8 mm³/s 0.8 mm
Bambu PETG-CF 255 °C 70 °C 0 to 30 % 9 mm³/s 0.8 mm

How do I set up my file for the Bambu Lab A1 mini?

Drop it here. It opens in Convert with the Bambu Lab A1 mini and Generic PETG-CF picked, and nothing converts until you click Convert.

Which build plate should I use?

Generic PETG-CF sets a bed temperature for each plate:

  • Textured PEI plate: 70 °C
  • Smooth PEI plate: 70 °C
  • Cool plate: not supported
  • Engineering plate: 70 °C
  • SuperTack plate: 70 °C

Do I need a hardened steel nozzle for PETG-CF?

Yes, PETG-CF needs a hardened steel nozzle, and it does not suit a 0.2 mm nozzle (Bambu Lab wiki).

Should I dry PETG-CF?

Dry PETG-CF before use, at 60 to 65 °C for 8 hours (Bambu Lab wiki).

Why is my PETG-CF part weak?

Cold room air weakens the bond between layers, so print PETG-CF in an enclosed printer (Bambu Lab wiki).

Where do these values come from?

From the profiles Bambu Studio ships, read at BambuStudio v02.09.01.70 (56a57d0). Where a filament profile leaves retraction unset, the table shows the printer profile's value.

Something wrong or missing on this page? feedback@lovlar.dev

Slicer and printer names belong to their owners. preslice is not affiliated with them.