PLA settings for the Creality Ender-3 V3 KE

Last updated 9 November 2026

Creality Print's Hyper PLA profile prints at 220 °C, with the bed at 50 °C and the part fan at 100 %.

Profile Nozzle Bed Part fan Max flow Retraction
Hyper PLA 220 °C 50 °C 100 % 23 mm³/s 0.8 mm
CR-PLA 220 °C 50 °C 100 % 18 mm³/s 0.8 mm
Hyper L-W PLA 220 °C 60 °C 60 to 100 % 4 mm³/s 0.6 mm
Hyper Luminous 220 °C 50 °C 100 % 21 mm³/s 0.8 mm
Hyper Marble 220 °C 50 °C 100 % 18 mm³/s 2.2 mm
Hyper Stardust 220 °C 50 °C 100 % 18 mm³/s 2 mm
Soleyin Ultra PLA 220 °C 50 °C 100 % 16 mm³/s 0.6 mm

How do I set up my file for the Creality Ender-3 V3 KE?

Drop it here. It opens in Convert with the Creality Ender-3 V3 KE and Hyper PLA picked, and nothing converts until you click Convert.

Which build plate should I use?

Hyper PLA sets a bed temperature for each plate:

  • Textured PEI plate: 50 °C
  • Smooth PEI plate: 50 °C
  • Cool plate: 50 °C
  • Engineering plate: 50 °C

Why won't my PLA stick?

Hyper PLA heats the bed to 50 °C, so wipe the sheet with 90 % or stronger isopropyl alcohol before you print (Prusa Knowledge Base). If a corner still lifts, add a brim (Prusa Knowledge Base).

Why is my PLA stringing?

Try 5 to 10 °C below the 220 °C that Hyper PLA sets, since a cooler nozzle strings less (Prusa Knowledge Base). A spool that has taken on moisture strings badly, so try a dry one (Prusa Knowledge Base).

Where do these values come from?

From the profiles Creality Print ships, read at CrealityPrint v7.3.1 (254250c). Where a filament profile leaves retraction unset, the table shows the printer profile's value.

Something wrong or missing on this page? feedback@lovlar.dev

Slicer and printer names belong to their owners. preslice is not affiliated with them.