PLA settings for the Qidi X-Plus 4

Last updated 9 November 2026

OrcaSlicer's Qidi Generic PLA profile prints at 210 °C, with the bed at 60 °C and the part fan at 100 %.

Profile Nozzle Bed Part fan Max flow Retraction
Qidi Generic PLA 210 °C 60 °C 100 % 14 mm³/s 0.8 mm
AliZ PLA 220 °C 55 °C 100 % 12 mm³/s 0.8 mm
Bambu PLA Basic 220 °C 55 °C 100 % 21 mm³/s 0.8 mm
Bambu PLA Dynamic 220 °C 55 °C 100 % 21 mm³/s 0.8 mm
Bambu PLA Galaxy 220 °C 55 °C 100 % 12 mm³/s 0.8 mm
Bambu PLA Glow 220 °C 55 °C 100 % 12 mm³/s 0.8 mm
Bambu PLA Impact 220 °C 55 °C 100 % 23.2 mm³/s 0.8 mm
Bambu PLA Marble 220 °C 55 °C 100 % 12 mm³/s 0.8 mm
OrcaSlicer has 148 more PLA profiles for this printer.

How do I set up my file for the Qidi X-Plus 4?

Drop it here. It opens in Convert with the Qidi X-Plus 4 and Qidi Generic PLA picked, and nothing converts until you click Convert.

Which build plate should I use?

Qidi Generic PLA sets a bed temperature for each plate:

  • Textured PEI plate: 60 °C
  • Smooth PEI plate: 60 °C
  • Cool plate: 45 °C
  • Engineering plate: 60 °C
  • SuperTack plate: 45 °C

Why won't my PLA stick?

Qidi Generic PLA heats the bed to 60 °C, so wipe the sheet with 90 % or stronger isopropyl alcohol before you print (Prusa Knowledge Base). If a corner still lifts, add a brim (Prusa Knowledge Base).

Why is my PLA stringing?

Try 5 to 10 °C below the 210 °C that Qidi Generic PLA sets, since a cooler nozzle strings less (Prusa Knowledge Base). A spool that has taken on moisture strings badly, so try a dry one (Prusa Knowledge Base).

Why does PLA clog in an enclosed printer?

Qidi Generic PLA heats the bed to 60 °C, and PLA softens below 60 °C, so open the door or lid once the bed passes 45 °C (Bambu Lab wiki).

Where do these values come from?

From the profiles OrcaSlicer ships, read at OrcaSlicer v2.4.2 (8500fcd). Where a filament profile leaves retraction unset, the table shows the printer profile's value.

Something wrong or missing on this page? feedback@lovlar.dev

Slicer and printer names belong to their owners. preslice is not affiliated with them.