PETG settings for the Bambu Lab H2D
Bambu Studio's Generic PETG profile prints at 255 °C, with the bed at 70 °C and the part fan at 40 to 90 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| Generic PETG | 255 °C | 70 °C | 40 to 90 % | 12 mm³/s | 0.8 mm |
| Bambu PETG Basic | 250 °C | 70 °C | 20 to 30 % | 18 mm³/s | 0.4 mm |
| Bambu PETG HF | 245 °C | 70 °C | 20 to 30 % | 25 mm³/s | 0.4 mm |
| Bambu PETG Matte | 245 °C | 70 °C | 20 to 30 % | 18 mm³/s | 0.8 mm |
| Bambu PETG Translucent | 245 °C | 70 °C | 10 to 30 % | 6 mm³/s | 0.8 mm |
| Fiberon PETG-ESD | 290 °C | 60 °C | 0 to 100 % | 20 mm³/s | 0.8 mm |
| Generic PETG HF | 220 °C | 70 °C | 20 to 40 % | 16 mm³/s | 0.4 mm |
| PolyLite PETG | 255 °C | 70 °C | 40 to 90 % | 11.5 mm³/s | 0.8 mm |
How do I set up my file for the Bambu Lab H2D?
Drop it here. It opens in Convert with the Bambu Lab H2D and Generic PETG picked, and nothing converts until you click Convert.
Which build plate should I use?
Generic PETG sets a bed temperature for each plate:
- Textured PEI plate: 70 °C
- Smooth PEI plate: 70 °C
- Cool plate: not supported
- Engineering plate: 70 °C
- SuperTack plate: 70 °C
Why is my PETG stringing?
Lower the nozzle toward 220 °C, the floor Generic PETG declares, and lengthen retraction (Prusa Knowledge Base). Wet PETG strings more, and Bambu Lab dries it at 60 to 65 °C for 8 hours in a forced-air oven (Bambu Lab wiki).
Why does PETG print so slowly?
Generic PETG caps flow at 12 mm³/s, and the slicer slows any move that would push more plastic than that (slicer source).
Why won't my PETG stick?
Generic PETG heats the bed to 70 °C, so if a part still lifts, clean the sheet first (Prusa Knowledge Base). On smooth PEI, apply a glue stick first, since PETG can bond hard enough to damage the sheet (Prusa Knowledge Base).
Where do these values come from?
From the profiles Bambu Studio ships, read at BambuStudio v02.09.01.70 (56a57d0). Where a filament profile leaves retraction unset, the table shows the printer profile's value.