PLA settings for the Bambu Lab P1P
Bambu Studio's Bambu PLA Basic profile prints at 220 °C, with the bed at 65 °C and the part fan at 50 to 100 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| Bambu PLA Basic | 220 °C | 65 °C | 50 to 100 % | 21 mm³/s | 0.8 mm |
| Bambu PLA Dynamic | 220 °C | 65 °C | 50 to 100 % | 21 mm³/s | 0.8 mm |
| Bambu PLA Galaxy | 220 °C | 65 °C | 50 to 100 % | 21 mm³/s | 0.8 mm |
| Bambu PLA Glow | 220 °C | 65 °C | 50 to 100 % | 18 mm³/s | 0.8 mm |
| Bambu PLA Lite | 220 °C | 65 °C | 50 to 100 % | 16 mm³/s | 0.8 mm |
| Bambu PLA Marble | 220 °C | 65 °C | 50 to 100 % | 12 mm³/s | 0.8 mm |
| Bambu PLA Matte | 220 °C | 65 °C | 50 to 100 % | 22 mm³/s | 0.8 mm |
| Bambu PLA Metal | 220 °C | 65 °C | 50 to 100 % | 21 mm³/s | 0.8 mm |
| Bambu Studio has 23 more PLA profiles for this printer. |
How do I set up my file for the Bambu Lab P1P?
Drop it here. It opens in Convert with the Bambu Lab P1P and Bambu PLA Basic picked, and nothing converts until you click Convert.
Which build plate should I use?
Bambu PLA Basic sets a bed temperature for each plate:
- Textured PEI plate: 65 °C
- Smooth PEI plate: 65 °C
- Cool plate: 35 °C
- Engineering plate: not supported
- SuperTack plate: 45 °C
Why is my PLA stringing?
Try 5 to 10 °C below the 220 °C that Bambu PLA Basic sets, since a cooler nozzle strings less (Prusa Knowledge Base). A spool that has taken on moisture strings badly, so try a dry one (Prusa Knowledge Base).
Where do these values come from?
From the profiles Bambu Studio ships, read at BambuStudio v02.09.01.70 (56a57d0). Where a filament profile leaves retraction unset, the table shows the printer profile's value.