PETG settings for the Creality Ender-3 V3 SE in Cura
Cura's Generic PETG profile prints at 215 °C, with the bed at 70 °C and the part fan at 100 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| Generic PETG | 215 °C | 70 °C | 100 % | not declared | 0.8 mm |
| Best Filament PETG | 220 °C | 70 °C | 50 % | not declared | 0.8 mm |
| eSUN PETG | 245 °C | 80 °C | 40 % | not declared | 3 mm |
| eMotionTech PETG | 240 °C | 70 °C | 100 % | not declared | 1.7 mm |
| Eryone PETG | 230 °C | 80 °C | 50 % | not declared | 4.5 mm |
| FDplast PETG | 220 °C | 70 °C | 50 % | not declared | 0.8 mm |
| GOOFOO PETG | 210 °C | 60 °C | 100 % | not declared | 4.5 mm |
| IMADE3D PETG | 230 °C | 65 °C | 100 % | not declared | 0.8 mm |
| Cura has 6 more PETG profiles for this printer. |
How do I set up my file for the Creality Ender-3 V3 SE?
Drop it here. It opens in Convert with the Creality Ender-3 V3 SE and Generic PETG picked, and nothing converts until you click Convert.
Why won't my PETG stick?
Generic PETG heats the bed to 70 °C, so if a part still lifts, clean the sheet first (Prusa Knowledge Base). On smooth PEI, apply a glue stick first, since PETG can bond hard enough to damage the sheet (Prusa Knowledge Base).
Where do these values come from?
From the profiles Cura ships, read at Cura main (42dbd93). Where a filament profile leaves retraction unset, the table shows the printer profile's value.