ABS settings for the Creality Ender-3
Creality Print's CR-ABS profile prints at 250 °C, with the bed at 105 °C and the part fan at 10 to 80 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| CR-ABS | 250 °C | 105 °C | 10 to 80 % | 8 mm³/s | 6 mm |
How do I set up my file for the Creality Ender-3?
Drop it here. It opens in Convert with the Creality Ender-3 and CR-ABS picked, and nothing converts until you click Convert.
Which build plate should I use?
CR-ABS sets a bed temperature for each plate:
- Textured PEI plate: 60 °C
- Smooth PEI plate: 105 °C
- Cool plate: 105 °C
- Engineering plate: 105 °C
Why does my ABS warp?
Bambu Lab says ABS needs a hot bed and a warm chamber to stop warping, and recommends an enclosed printer (Bambu Lab wiki). CR-ABS heats the bed to 105 °C; on an open printer, turn on the draft shield, a wall that keeps the part warmer (Prusa Knowledge Base).
Are ABS fumes harmful?
ABS gives off fumes that can be a health risk, so print it in a well-ventilated room (Prusa Knowledge Base). Keep the airflow off the print itself, since a draft makes it warp (Prusa Knowledge Base).
Where do these values come from?
From the profiles Creality Print ships, read at CrealityPrint v7.3.1 (254250c). Where a filament profile leaves retraction unset, the table shows the printer profile's value.