ABS settings for the Creality K1 Max
Creality Print's Generic ABS profile prints at 260 °C, with the bed at 100 °C and the part fan at 10 to 60 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| Generic ABS | 260 °C | 100 °C | 10 to 60 % | 16 mm³/s | 0.8 mm |
| CR-ABS | 260 °C | 100 °C | 10 to 60 % | 18 mm³/s | 0.8 mm |
| Hyper ABS | 260 °C | 80 °C | 10 to 60 % | 23 mm³/s | 0.6 mm |
How do I set up my file for the Creality K1 Max?
Drop it here. It opens in Convert with the Creality K1 Max and Generic ABS picked, and nothing converts until you click Convert.
Which build plate should I use?
Generic ABS sets a bed temperature for each plate:
- Textured PEI plate: 100 °C
- Smooth PEI plate: 100 °C
- Cool plate: 100 °C
- Engineering plate: 105 °C
Why does my ABS warp?
Bambu Lab says ABS needs a hot bed and a warm chamber to stop warping, and recommends an enclosed printer (Bambu Lab wiki). Generic ABS heats the bed to 100 °C; on an open printer, turn on the draft shield, a wall that keeps the part warmer (Prusa Knowledge Base).
Are ABS fumes harmful?
ABS gives off fumes that can be a health risk, so print it in a well-ventilated room (Prusa Knowledge Base). Keep the airflow off the print itself, since a draft makes it warp (Prusa Knowledge Base).
Where do these values come from?
From the profiles Creality Print ships, read at CrealityPrint v7.3.1 (254250c). Where a filament profile leaves retraction unset, the table shows the printer profile's value.