PLA settings for the Elegoo Neptune 4 Pro
OrcaSlicer's Elegoo PLA profile prints at 220 °C, with the bed at 60 °C and the part fan at 100 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| Elegoo PLA | 220 °C | 60 °C | 100 % | 16 mm³/s | 0.8 mm |
| Elegoo PLA Basic | 220 °C | 60 °C | 50 to 100 % | 21 mm³/s | 0.8 mm |
| Elegoo PLA Galaxy | 220 °C | 60 °C | 80 to 100 % | 18 mm³/s | 0.8 mm |
| Elegoo PLA Marble | 220 °C | 60 °C | 80 to 100 % | 18 mm³/s | 0.8 mm |
| Elegoo PLA Matte | 220 °C | 60 °C | 60 to 80 % | 16 mm³/s | 0.8 mm |
| Elegoo PLA PRO | 220 °C | 60 °C | 50 to 100 % | 20 mm³/s | 0.8 mm |
| Elegoo PLA Silk | 230 °C | 60 °C | 60 to 80 % | 16 mm³/s | 0.8 mm |
| Elegoo PLA Sparkle | 220 °C | 60 °C | 80 to 100 % | 18 mm³/s | 0.8 mm |
| OrcaSlicer has 147 more PLA profiles for this printer. |
How do I set up my file for the Elegoo Neptune 4 Pro?
Drop it here. It opens in Convert with the Elegoo Neptune 4 Pro and Elegoo PLA picked, and nothing converts until you click Convert.
Which build plate should I use?
Elegoo PLA sets a bed temperature for each plate:
- Textured PEI plate: 60 °C
- Smooth PEI plate: 60 °C
- Cool plate: 35 °C
- Engineering plate: not supported
Why is my PLA stringing?
Try 5 to 10 °C below the 220 °C that Elegoo PLA sets, since a cooler nozzle strings less (Prusa Knowledge Base). A spool that has taken on moisture strings badly, so try a dry one (Prusa Knowledge Base).
Where do these values come from?
From the profiles OrcaSlicer ships, read at OrcaSlicer v2.4.2 (8500fcd). Where a filament profile leaves retraction unset, the table shows the printer profile's value.