Minimum layer time (slow down below) (min_layer_time)
Minimum layer time (slow down below) is a number in s. The printing speed in exported gcode will be slowed down, when the estimated layer time is shorter than this value, to get better cooling for these layers.
What does each slicer call it?
Five slicers, five spellings of one setting. The scope column is which preset the key belongs to, which is what decides whether changing it follows the printer, the filament, or the print profile.
| Slicer | Key | Scope |
|---|---|---|
| PrusaSlicer | slowdown_below_layer_time |
filament |
| Bambu Studio | slow_down_layer_time |
filament |
| OrcaSlicer | slow_down_layer_time |
filament |
| Cura | cool_min_layer_time |
process |
| Creality Print | slow_down_layer_time |
filament |
Where does it live in the file?
The slicers file this under different presets: PrusaSlicer, Bambu Studio, OrcaSlicer and Creality Print under filament, Cura under process. That is why the value can survive a profile change in one slicer and not in another. A .3mf is a zip, so unzip it and search for slowdown_below_layer_time, slow_down_layer_time and cool_min_layer_time, or open the file in preslice and read the Raw tab, which searches every member at once.
Four of the five slicers write their settings into a sidecar part beside the geometry. Cura writes them into the model XML itself, so there is no config part to open.
| Slicer | Part | Format |
|---|---|---|
| PrusaSlicer | Metadata/Slic3r_PE.config |
INI, one key = value per line |
| Bambu Studio | Metadata/project_settings.config |
JSON, one flat object |
| OrcaSlicer | Metadata/project_settings.config |
JSON, one flat object |
| Cura | 3D/3dmodel.model |
XML metadata inside the model part, under a cura namespace |
| Creality Print | Metadata/project_settings.config |
JSON, one flat object |
What values are valid?
Each slicer declares its own type, default, and bounds for its key. They do not always agree, and where they disagree the file is still valid in both: the slicer that wrote it is the one that enforced its own rule.
| Slicer | Type | Unit | Default | Range |
|---|---|---|---|---|
| PrusaSlicer | float | approximate seconds | 20 |
0 to 1000 |
| Bambu Studio | floats | s | not declared | 0 to 1000 |
| OrcaSlicer | floats | s | not declared | 0 to 1000 |
| Cura | float | s | 5 |
not declared |
| Creality Print | floats | s | not declared | 0 to 1000 |
Cura declares no range for this key, so nothing in the file bounds it.
The slicers disagree on the type: PrusaSlicer and Cura as float, Bambu Studio, OrcaSlicer and Creality Print as floats. preslice reads all of them.
Every type, default, and bound above is read from the slicer's own field definitions rather than from measurement: PrusaSlicer's PrintConfig.cpp, Bambu Studio's PrintConfig.cpp, OrcaSlicer's PrintConfig.cpp, Cura's fdmprinter.def.json and Creality Print's PrintConfig.cpp.
Can I read it from my own file?
Yes, without installing a slicer. Open preslice and drop a .3mf on the page. It unzips and parses the file in your browser, and shows minimum layer time (slow down below) under its own name alongside the rest of the print settings. The file never leaves your machine, and nothing uploads.