PLA settings for the Original Prusa i3 MK3S
PrusaSlicer's Prusament PLA profile prints at 215 °C, with the bed at 60 °C and the part fan at 100 %.
| Profile | Nozzle | Bed | Part fan | Max flow | Retraction |
|---|---|---|---|---|---|
| Prusament PLA | 215 °C | 60 °C | 100 % | 15 mm³/s | 0.8 mm |
| 3D-Fuel Standard PLA+ | 220 °C | 60 °C | 100 % | 10 mm³/s | 0.8 mm |
| 3D-Fuel Tough PLA+ | 230 °C | 60 °C | 100 % | 10 mm³/s | 0.8 mm |
| Alzament Basic PLA | 215 °C | 60 °C | 100 % | 15 mm³/s | 0.8 mm |
| AmazonBasics PLA | 210 °C | 60 °C | 100 % | 15 mm³/s | 0.8 mm |
| Buddy3D PLA | 215 °C | 60 °C | 100 % | 15 mm³/s | 0.8 mm |
| ColorFabb PLA-PHA | 210 °C | 60 °C | 100 % | 10 mm³/s | 0.8 mm |
| ColorFabb bronzeFill | 210 °C | 60 °C | 100 % | 4 mm³/s | 0.8 mm |
| PrusaSlicer has 137 more PLA profiles for this printer. |
How do I set up my file for the Original Prusa i3 MK3S?
Drop it here. It opens in Convert with the Original Prusa i3 MK3S and Prusament PLA picked, and nothing converts until you click Convert.
Why is my PLA stringing?
Try 5 to 10 °C below the 215 °C that Prusament PLA sets, since a cooler nozzle strings less (Prusa Knowledge Base). A spool that has taken on moisture strings badly, so try a dry one (Prusa Knowledge Base).
Where do these values come from?
From the profiles PrusaSlicer ships, read at PrusaSlicer 2.9.6 profiles (3f2935e). Where a filament profile leaves retraction unset, the table shows the printer profile's value.